When handling wire rope disk, you must use crane to avoid damage to the disc and chaos rope roll phenomenon; when ground handling, rope disc allowed on uneven ground rolling, so that the surface of the wire rope crushed; there is no packaging rope handling, rope sticky surface can not affect the use of stone, clay and the like.
Wire rope should be stored in dry and ventilated warehouse, to prevent direct sunlight or heat dry roasted, the Treasury can not rope multilayer stack. If a large number of long-term storage of wire rope, should be inspected regularly to prevent rust, rust was found after treatment should be promptly and re-coated with lubricant, such as severe corrosion, the section rope should be discarded. Rope placed outdoors, the application of wood paving, on dry ground, and covered with tarpaulins. Rope storage for more than a year, should be re-sampling test, can be used after qualifying.
In the manufacture of coated wire rope enough oil, but in the course of the original lubricant will bleed and slowly dissipated, so use should be regularly coated wire rope lubricants, rust and lubrication to ensure reduce friction and prolong the life of wire rope.
Use rope Check
Wire rope during use, according to relevant provisions of the periodic inspection and test results make a record. Check should include the following items: rope wear, broken wires, the degree of corrosion, lubrication, deformation, or the end of the rope connecting portion and the fastening portion other abnormal phenomena. Wire rope reel pulley wheel over the line and the top member to slide easily through the friction member grind grooves to make rope wear faster, sometimes also make rope pulley wear deformation, increase the bending fatigue. Therefore, these components must be carefully checked and any inappropriate, must be replaced immediately or amended.
Broken wire processing
Wire rope during use, appear broken wire, wire rope can continue to run, it should be removed as soon as possible broken wire. Broken wire with pliers to pinch off the direct method, although common, but it is not the best way, because it will leave a rough breakage affect the use, you can use Cox clamp to live broken wire bent back and forth until it broke, in this method makes the wire breakage sandwiched shares will not cause harm.